Exterior Design: • Brick work to be laid per plan with a gray mortar and a grapevine joint unless otherwise noted. • Buyer will have a choice of brick within an allowance. • Stone work will be selected by the buyer and is per plan with an allowance. • The front porch on the plan is priced as typical concrete. Brick pavers can be added as an options at Buyer’s request. • All-weather, class “A” fiberglass, dimensional shingle with a 30-year warranty. • Roofs will be constructed with engineered trusses and convention rafter framing per plan. • Roof sheathing will be 7/16” OSB plywood. • Ridge vents and louver vents will be installed to provide attic ventilation per plan. • The deck is per plan. • A concrete porch, driveway and patio are standard, however a variety of other finishes are available as an option. Such as stamped concrete, brick or exposed aggregate. Buyer has an allowance for all walks, patio, porch and driveway. All the above items are figured as regular concrete. • 42” walkways poured with a minimum of 4,000 psi concrete. • The driveway to be poured with a minimum of 4,000 psi concrete. • Gutters will be 5” aluminum with baked on enamel. • Downspouts are 4” aluminum with baked on enamel. • Downspouts will be connected to a schedule 35 pvc pipe, installed 12-18“ underground which will drain into the storm sewer at the street or through the curb at the street or the property line drainage on walk out lots. Exterior Trim: • Ceiling above the front porch and rear porches will be a 4” bead ceiling and stained in a color to be chosen by the buyer. • Gutter boards, trim material will be a primed redwood on all areas except siding. • Exterior siding areas to be concrete composite material and location is per plan. i.e. bay windows. • Decks will be made from pressure treated lumber and per plan.