Interior Design: Selections are more detailed on our Company Selection Sheet Agreement. These selections are made by the Buyer, Builder and Company Selection Specialist as a team, then are approved and signed by the Buyer and Builder. • Premium Porter or Sherwin Williams paints are used. No builder-grade flat products are used. Typically it is Porter “Silken Touch” and is scrubable. •Buyer will have multiple interior color choices. Up to 7 per home without additional charge. • Wallpaper and special faux finishes will be an extra. • Trim woodwork will be primed and finished with two coats of Porter oil base paint. • Walls will be primed and finished with two to three coats of Porter latex paint as specified above. • Gas direct-vent or wood burner fireplace by Lennox or Kozy heat with tile surround and custom wood mantle. Interior Trim: • Buyer will select the profile of base, casing and crown moldings. Moldings will be poplar wood. Primed for paint, not stain. • Based will be 5 1/4” tall. Casing will be 3 1/2” wide. Crown will be 5-9” wide with 1, 2 or 3 stage to be selected. All crown molding is per plan, typically in Foyer, Dining room, Great room and Study. • Interior doors will be primed six-panel masonite smooth-finish solid-core doors. Buyer will have a choice of door styles. • Closet shelving will be a coated white seal wire system for closets and pantry. Buyer will have an allowance for closet shelving. • Door hardware will be a premium polished brass lever type. Deadbolts will be installed on exterior doors.